Civil Engineering Courses ( Please Choose the course you want know about it! )

• CONSTRUCTION DESIGN
• ADVANCED CONSTRUCTION DESIGN
• SHOPDRAWINGS FOR CONCRETE BUILIDINGS
• STEEL BUILIDING DESIGN
• ROAD DSEIGN BY CIVIL 3D
• ROAD DSEIGN BY LANDDESKTOP
• SEWAGE & WATER NETWORKS DESIGN
• CIVIL 3D
• LAND-DESKTOP
• TEKLA
• REVIT
• SITE WORKS FOR BUILNG CONSTRUCTION
• PRIMAVERA

Course Brief

• This course is a mix between the fundamental concrete design & the software program needed in the structural design.
• By this course you will be able to work as junior designer in any design office.
• This course is a practice for all design stages which is applied in any structural design office.
• All the design program and excel sheets will be available during the course.

Course Topics

• Session 1
  • Concrete & Steel Reinforcement fundamentals.
• Session 2
  • Design of Slabs (Solid Slab, hollow block Slab, Flat Slab, Paneled Beam).
  • Typical Structure Drawing of slabs.
  • Egyptian code limits for Design & Detailing of Slabs.
• Session 3
  • Design of beams.
  • Design of short columns.
  • Egyptian code limits for Design & Detailing of Beams & Columns.
• Session 4
  • Design of long columns.
• Session 5
  • Design of Stairs.
  • Design of retaining walls.
• Session 6
  • Design of Foundations.
• Session 7
  • Modeling & Design of slabs and Beams on safe program.
• Session 8
  • Completion of Modeling & Design of slabs and Beams on safe program.
• Session 9
  • Wind Loads & Seismic Loads on Etab Program.
• Session 10
  • Design of Vertical elements (Columns and Shear walls) on Etab Program.
  • Convert the reactions form Etabs model to safe program for design of raft foundation.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 20 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

ADVANCED CONSTRUCTION DESIGN

Course Brief

• This course is a mix between the fundamental concrete design & the software program needed in the structural design.
• By this course you will be able to work as junior designer in any design office.
• This course is a practice for all design stages which is applied in any structural design office.
• All the design program and excel sheets will be available during the course.

Course Topics

• Session 1
  • Design of water tanks.
• Session 2
  • Design of Retaining walls.
• Session 3
  • Design of precast Buildings.
• Session 4
  • Completion Design of precast Buildings.
• Session 5
  • Introduction for design of bridges.
• Session 6
  • Completion of design of bridges.
• Session 7
  • Design of post tensions slabs.
• Session 8
  • Completion of design of post tension slabs.
• Session 9
  • Design of post high rise buildings.
• Session 10
  • Completion of design of high rise buildings.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 20 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

SHOPDRAWINGS FOR CONCRETE BUILIDINGS

Course Brief

• By this course you will able to achieve any concrete shop drawings with bar bending schedule.

Course Topics

• Session 1
  • Introductions.
• Session 2
  • Shop drawings of slabs (plans & sections).
• Session 3
  • Design of precast Buildings.
• Session 4
  • Shop drawings of beams and columns (Elevations & sections).
• Session 5
  • Shop drawings of foundations (Plans & sections).
• Session 6
  • Types of codes for presentation of shop drawings (BS & Egyptian Codes).
• Session 7
  • Bar Bending schedule.
• Session 8
  • Completion of Bar Bending schedule.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 20 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

STEEL BUILIDING DESIGN

Course Brief

• By this course you will able to work as junior steel designer in any design office.

Course Topics

• Session 1
  • STATICAL SYSTEMS.
• Session 2
  • LOADING.
• Session 3
  • DESIGN OF FRAME.
• Session 4
  • DESIGN OF TRUSS.
• Session 5
  • DESIGN OF END WALL FRAMING.
• Session 6
  • DESIGN OF BRACING.
• Session 7
  • DESIGN OF JACK SYSTEMS.
• Session 8
  • DESIGN OF MEZZANINE.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 20 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

ROAD DSEIGN BY CIVIL 3D

Course Brief

• This course is a mix between the fundamental concrete design & the software program needed in the structural design.
• By this course you will be able to work as junior designer in any design office.
• This course is a practice for all design stages which is applied in any structural design office.
• All the design program and excel sheets will be available during the course.

Course Topics

• Session 1 & 2
  • HORIZONTAL ALIGMNET.
• Session 3 & 4
  • VERTICAL ALIGNMENT.
• Session 5 & 6
  • CROSS SECTIONS.
  • INTERSECTIONS.
• Session 7 & 8
  • ROUNDABOUTS.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 16 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

ROAD DSEIGN BY LAND-DESKTOP

Course Brief

• This course is a mix between the fundamental concrete design & the software program needed in the structural design.
• By this course you will be able to work as junior designer in any design office.
• This course is a practice for all design stages which is applied in any structural design office.
• All the design program and excel sheets will be available during the course.

Course Topics

• Session 1 & 2
  • HORIZONTAL ALIGMNET.
• Session 3 & 4
  • VERTICAL ALIGNMENT.
• Session 5 & 6
  • CROSS SECTIONS.
  • INTERSECTIONS.
• Session 7 & 8
  • ROUNDABOUTS.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 16 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

SEWAGE & WATER NETWORKS DESIGN

Course Brief

• By this course you will be able to work as junior designer in any design office.
• This course is a practice for all design stages which is applied in any utilities design office.
• All the design program like water & sewerage and excel sheets will be available during the course

Course Topics

• Session 1 & 2 & 3
  • SEWAGE PIPE LINE DESIGN.
• Session 4 & 5 & 6
  • WATER PIPE LINE DESIGN.
• Session 7
  • SEWER CAD APPLICATION ON SEWAGE PIPE LINES.
• Session 8
  • WATER CAD APPLICATION ON SEWAGE PIPE LINES.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 16 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

CIVIL 3D Program

Course Brief

• By this course you will be able to create any quantity surveying or shop drawing related to road works by using CIVIL3D program.

Course Topics

• Session 1
  • CIVIL 3D PREFACE.
• Session 2
  • POINTS MENU.
• Session 3
  • ALIGMNET MENUE.
• Session 4
  • PROFILE MENUE.
• Session 5
  • ASSEMBLE & SUBASSEMBL.
• Session 6 & 7
  • CREATE COORRIDOR.
• Session 8
  • QUANTITY SURVYING.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 16 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

LAND-DESKTOP Program

Course Brief

• By this course you will be able to create any quantity surveying or shop drwaing related to road works by using AUTODESK LAND DESKTOP.

Course Topics

• Session 1
  • LANDDESKTOP PREFACE.
• Session 2
  • POINTS MENU.
• Session 3
  • ALIGMNET MENUE.
• Session 4
  • PROFILE MENUE.
• Session 5 & 6 & 7
  • CROSS SECTION.
• Session 8
  • QUANTITY SURVYING.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 16 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

TEKLA Program

Course Brief

• By this course you will be able to make all shop dawning's related to concrete and steel works.

Course Topics

• Session 1
  • Introduction.
• Session 2
  • Member Commands.
• Session 3
  • Completion of Member Commands.
• Session 4
  • Connections.
• Session 5
  • Completion of Connections.
• Session 6
  • Catalog.
• Session 7
  • Completion of Catalog.
• Session 8
  • Project Sample.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 16 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

REVIT Program

Course Brief

• By this course you will be able to make all shop dawning's related to concrete and steel works.

Course Topics

• Session 1
  • Introduction, User Interface, Levels Lines & Foundation Elements.
• Session 2
  • Superstructure Modeling, Structural Columns.
• Session 3
  • Structural Beams, Framing Element, On Grid Elements.
• Session 4
  • Beams System, Floors.
• Session 5
  • Beam Copying Tools-copy Paste-sloped Framing.
• Session 6
  • Shaft Openings, Framing Elevation.
• Session 7
  • Dimension Tools, Tags and Tag All Method, Beam Annotation ,Symbols.
• Session 8
  • Project Sample.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 24 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

SITE WORKS FOR BUILDING CONSTRUCTION

Course Brief

• By This course you will be aware with all the method statement for the construction & finishing stages.
• During the course , you will study a housing project from the excavation stage till the turn key stage.

Course Topics

• Session 1
  • INTRODUCTION , BUILDING EXCVATION & SITE PREPRATION.
• Session 2
  • FOOTING CONSTRUCTION.
• Session 3
  • COLUMNS, SHEAR WALL CONSTRUCTION.
• Session 4
  • SLABS CONSTRUCTION, PROOFING, CURING.
• Session 5
  • BRIK WORKS, REINFORCMENT & CONCRETE QUANTITY SURVYING.
• Session 6
  • Electric, plaster& Gibson works.
• Session 7
  • Carpentering & aluminum works.
• Session 8
  • Flooring works.
• Session 9
  • Plumping works.
• Session 10
  • Painting works.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 25 hours.

Instructor Prequalification

• Course instructors are senior design engineers who have professional experience in the design of various projects.

Primavera (p6)

Course Brief

• By This course you will be aware all the planning methodology and you can change your career to junior planner.

Course Topics

• Session 1
  • Introduction.
  • Concepts of Project Management.
  • Objectives of Project Managing.
  • Creating EPS and OBS hierarchy.
  • What Is Project Methodology and Project Management.
• Session 2
  • Understanding WBS.
  • Relationships between Activities.
  • Defining The Critical Path of the project.
• Session 3
  • Interface.
  • Navigating The Main Screen.
  • Menus and Tool Bars.
  • Activity Table and Gantt Chart.
  • Customizing The Layout.
  • Adding New Project.
• Session 4
  • Defining currency and units.
  • Creating WBS.
  • Defining Calendars.
  • Creating Activities ID and Codes.
  • Inserting Activities.
• Session 5
  • Working in Project.
  • Inserting Relationships.
  • Scheduling The Project.
  • Adding Constraints, suspended and resuming dates.
  • Customizing activity Table.
  • User- defined fields.
• Session 6
  • Customizing the Gantt Chart.
  • Customizing Time Scale.
  • Filtering, Sorting and Grouping Activities.
  • Using Global Change.
• Session 7
  • Working in Network Logic.
  • Tracking the Project schedule.
  • Creating Project Baseline(s).
  • Updating The Project with actual dates and percentage of work.
• Session 8
  • Comparing Baseline schedule to the current one.
  • Analyzing the comparing results.
  • Getting Reports.
  • Tabular Reports.
  • layouts Reports.
• Session 9
  • Resources.
  • The Meaning of resources.
  • Understanding driving recourses and how they affect the project.
  • Resources and calendars.
  • Creating resources and roles database.
  • Cost Accounts.
  • Assignment.
  • Assigning resources to activities.
• Session 10
  • Using resource, cost and budget layouts.
  • Working with resources.
  • Cost account.
  • Sorting, grouping and filtering resources.
  • Using resource profile and resource table.
• Session 11
  • Leveling resources.
  • Tracking the project resources.
  • Updating Baseline(s).
  • Updating the project with actual resources.
  • Comparing baseline cost to the current.
  • Performance Control.
  • Planned cost.
  • Earned cost.
• Session 12
  • Actual cost.
  • Cost and schedule variance.
  • Project Issues and thresholds.
  • Adding Issues.
  • Assign tracking layouts to issues.
  • Using issue navigator.
  • Thresholds.
  • Monitoring thresholds.
• Session 13
  • Risk Managing.
  • Adding Risks.
  • Calculating exposure value.
  • Calculating Risk impact.
  • Getting Reports.
  • Resources reports.
  • Cost reports.
  • Budget reports.
  • Custom reports.
  • Some Advanced Features.

Number of Audience

• UP TO 5 Persons.

Course Duration

• 36 hours.

Instructor Prequalification

• Course instructors are senior planner engineers who have professional experience in the planning of various projects.